|
New Vertical Express Mixers
Vertical mixers that process round bales and other forms of hay while mixing other ingredients into your cattle’s blended ration.
Design Emphasis on
- Value
- Low Loading Height
- Low Horsepower Requirements
- Durability
- Full Frame Trailer
- 4-Point Scale
- Proudly Made in U.S.A.
The Vertical Express series also incorporates many customer friendly features such as Adjustable Height hitch, PTO Driveline Storage Holder, Hydraulic hose end holders, Shear Bolt Protection, and long scale head swing arm.
475, 555, 645
Mid-Size Vertical Mixers 
Flared Side Tub Design Advantages
- Smaller Diameter Tub Bottom Reduces Torque
- Larger Diameter Tub Bottom Increases Capacity
- Lower Loading Height
- Tapered Sides for Improved Feed Flow
- Reduced Horsepower Requirement
- Available Magnet Traps for Ferrous Material
|
AUTO-MIX Drive Advantages
- Reduced Horsepower Requirement
- Drastically Reduced Startup Torque
- Faster, More Even Unloading
- Improved Clean Out
- Superior Hay Length Control
- Circulation Pump Kit Optional
- Fully Automatic Shifting
Top View showing improved, tapered tub design and the new high flow, low torque screw. Visible near the bottom of the tub wall are the resistor plates which are used in conjunction with the speed selection feature of the AUTO-MIX drive to control hay staple length. also shown is the huge top opening and improved screw profile. Both of these features combine to allow round bales to process faster.
|
| Features and Specifications |
|---|
| &nsp; | 475A | 555A | 645A |
|---|
| Weight, Trailer Model(lbs.) | 9,540 | 9,970 | 10,400 |
| Overall Length, including trailer | 232" | 232" | 232" |
| Overall Width, Door Parts Removed | 123" | 123" | 123" |
| Height On Trailer, 12.5L x 15" Tires | 116" | 116" | 116" |
| Transmission Make/Model | GM400 | GM400 | GM400 |
| Transmissions Speeds | 3 | 3 | 3 |
| Tractor PTO Speeds | 1000 | 1000 | 1000 |
| Minimum Horsepower Required | 65 | 65 | 65 |
| Mixing Capacity, cu. ft. | 475 | 555 | 645 |
| Mixing Capacity, bushels | 380 | 444 | 516 |
| Maximun Lbs. With Heavy Ration | 16,000 | 16,000 | - |
Twin Vertical Feed Mixers
Flared Side, Twin Screw Design Advantages
- Lower Loading Height
- Smaller Diameter Tub Bottom Reduces Torque
- Larger Diameter Tub Top Increases Capacity
- More Knives & Flighting To Process Hay Faster
- Tapered Sides For Improved Feed Flow
- Optional End Caps Prevent Hay Spillage Without Increasing Loading Height
Advantages of AUTO-MIX™ Drive
Improved Mix Quality
Reduced Mixing Time
Faster, More Even Unloadin
Better Clean Out
Reduced Horsepower Requirement
|
1 to 40 RPM Range
Automatic Shifting
Eliminates PTO Overloading Failures
Drastically Reduced Startup Torque
Superior Hay Staple Length Control
|
 |
<-- Choose from either front corner chain conveyor discharge,... |
| or a Low maintenance left front side discharge with twin magnets. --> |
 |
 |
<-- AUTO-MIX trailers and stationaries are equipped with a heavy-duty rebuilt Allison transmission. |
| Optional rear Auxiliary door allows unloading premixes directly into commodity stall. --> |
 |
 |
<-- Huge, open top allows multiple round bales to be processed quickly. Twin screws and up to 18 knives insure quick, complete cutting and mixing. |
|
|
Copyright
©2003 Tuttle Motors Co.