2019 Case IH Farmall 75A

Call for Price


New/Used
New
Usage
3 Hours
Availability
In Stock
Location
Tuttle Motor & Hardware
VIN
CJAY00829
Stock #
23375
Title
Clean
Condition
Excellent
Year
2019
Manufacturer
Case IH
Model
Farmall 75A

Overview

Description

Farmall® Utility 75A



The strongest of the Farmall Utility A lineup with 74 engine horsepower at 2300 ERPM, this tractor can handle your tough jobs around the farmyard.

Quick Specs
  • Gross Horsepower: 74
  • PTO Horsepower: 60
  • ?Operator Area: Cab or ROPS
  • Traction: 2WD or MFD
  • Transmission: 8x8 mechanical, 12x12 power or 12x12 with creeper
  • Emissions compliance: Tier 4 B/Final
Engine Performance
  • Advertised Engine Power, Rated, hp (kW): 74 (55)
  • Maximum Engine Power, hp (kW): Same as advertised
  • Rated Engine Speed, rpm: 2300
  • Power Boost, hp (kW): No boost
  • Fuel Tank capacity, gal (L): 21.7 (82)
  • Diesel Exhaust Fluid (DEF) tank capacity, gal (L): No DEF
PTO Performance
  • PTO Horsepower, Basic / Optional Transmission, hp (kW): 60 (45)
  • PTO Speeds, rpm: 540 std; 540/540E opt.
  • PTO operational Type (Independent; Live; Continuous): Independent
Basic Engine
  • Engine Make: Case IH FPT
  • Engine Model: S8000 Series
  • Number of Cylinders: 3
  • Displacement, cu in (L): 179 (2.93)
  • Engine Bore, in (mm): 4.09 (104)
  • Engine Stroke, in (mm): 4.53 (115)
  • Block Design, Replaceable Liners: Parent bore
  • Aspiration, Turbocharged or Naturally Aspirated: Wastegate turbocharged, aftercooled
Fuel System
  • Fuel System Description: High pressure common rail
  • Fuel System Control, Electronic or Mechanical: Electronic
  • Fuel Injection to combustion chamber, Direct or Indirect: Direct
Emission and Exhaust Treatment
  • Emission Level, US EPA Tier: Tier 4B / Final
  • Selective Catalytic Reduction (SCR) w/Diesel Exhaust Fluid (DEF): No
  • Exhaust Gas Recirculation (EGR): Internal EGR
  • Cleanup Catalyst (CUC): No
  • Diesel Oxidation Catalyst (DOC): DOC standard
  • Diesel Particulate Filter (DPF): Particulate Matter Catalyst
  • Exhaust Pipe, Vertical stack or Horizontal: Vertical stack std; Horizontal opt. w/open ROPS
Cooling System
  • Fan Drive Type: Belt w/cab; Viscous fan w/open ROPS
Electrical System
  • System Rating, Volts: 12
  • Alternator Rating, Amps: 120
Basic Transmission Configuration
  • Manufacturer's Description: 8Fx8R Mechanical Shuttle
  • Transmission Type: 4 gears plus High-Low Ranges
  • Number of Forward / Reverse Speeds: 8F / 8R
  • Maximum Speed Forward, mph (kph): 18.6 (30)
  • Creeper Range Available: See 12x12 w/ creeper option
  • Shuttle (Forward-Reverse) Available: Mechanical synchro-shuttle std.
Optional Transmission 1
  • Manufacturer's Description: 12x12 Power Shuttle
  • Transmission Type: 3 ranges, 4 gears; 25 mph (40 kph) w/MFD
  • Number of Forward / Reverse Speeds: 12F / 12R
Optional Transmission 2
  • Manufacturer's Description: 12x12 w/opt. creeper
  • Transmission Type: 8 additional creeper speeds
  • Number of Forward / Reverse Speeds: 20F / 20R
Wheel Or Track Configuration
  • Drive Wheels or Tracks; 2WD, 4WD, 2WD / 4WD, 2 Tracks or 4 Tracks: 2WD / 4WD
  • Steering Configuration: Front Steer, Frame Articulated, or Track-type Steer: Front Steer
Rear Axle Assembly
  • Final Drive Location and Description: Inboard planetary
  • Axle Output End, Flange or Bar: Flange
  • Axle Bar Diameter, in (mm): No bar axle
Front Axle
  • Suspended Front Axle Available: No
Brakes
  • Service Brake Type: Wet disc
Hydraulic System
  • Hydraulic System Type: Open center
  • Main Hydraulic Pump Type: Dual gear pumps
  • Implement Pump Flow, gpm (Lpm): 12.6 (47.7)
  • Optional Pump Flow, gpm (Lpm): No option
  • Number of Standard Remote Valves: 2 std.; 3rd opt.
3-Point Hitch Features
  • 3-Point Hitch Category: Category 1 / 2
  • Optional Hitch Category: No option
  • Draft Sensing or Lift Control: Draft and Position control, top link sensing
  • Draft Link Ends Telescopic: Yes, standard
3-Point Hitch Lift Capacity
  • Standard Lift Capacity 24 Inches behind pin, lb (kg): 4,299 (1950)
  • Optional Lift Capacity 24 Inches behind pin, lb (kg): 4,740 (2150)
  • Standard Lift Capacity at lift pin, lb (kg): 5,952 (2700)
  • Optional Lift Capacity at lift pin, lb (kg): np
Drawbar
  • Drawbar Description: Swinging, extendable
Wheelbase / Trackbase
  • Wheelbase, 2WD, in (mm): 82.1 (2085)
  • Wheelbase/Trackbase, MFD/4WD or Track, in (mm): 83.6 (2123)
Length
  • Length, 2WD, incl. Hitch/Drawbar, in (mm): 151.8 (3856)
  • Length, MFD/4WD or track, incl. Hitch/Drawbar, in (mm): 151.8 (3856)
Vertical Dimensions
  • Height to Top of Cab, in (mm): 100.2 (2545)
  • Height to Top of ROPS raised, in (mm): 99.8 (2536)
Width w/ Tires Or Tracks
  • Overall Width, with standard wheels or tracks, in (mm): 61.5 (1562) flange to flange
Weight (w/ Tires Or Tracks)
  • Weight, 2WD w/ROPS, lb (kg): 5,622 (2550)
  • Weight, MFD/4WD w/ROPS, lb (kg): 6,283 (2850)
  • Weight, 2WD w/Cab, lb (kg): 6,173 (2800)
  • Weight, MFD/4WD or Tracks w/Cab, without ballast, lb (kg): 6,834 (3100)
  • Weight, Total allowable, w/maximum ballast, lb (kg): 7,848 (3560) w/opt. ballast
Tire / Track Size
  • Front Tire Size, 2WD: 9.5L-15 F2
  • Front Tire Size orTrack Width, MFD/4WD or Track: 11.2-24 R1 or R1W Ag
  • Rear Tire Size or Track Width: 16.9-30 R1 or R1W Ag

Specs

Engine

Engine Manufacturer
Case IH FPT
Engine Type
S8000 Series
Horsepower
74 hp (55 kW)
PTO HP
60 hp (45 kW)
Rated RPM
2300
Bore and Stroke
4.09 in. (104 mm) x 4.53 in. (115 mm)

Specifications

Wheelbase
82.1 in. (2085 mm)
Height
100.2 in. (2545 mm)
Width
61.5 in. (1562) flange to flange (mm)
Weight
5,622 lb. (2550 kg)
Tire Size
16.9-30 R1 or R1W Ag

General

Fuel System
High pressure common rail
Fuel Capacity
21.7 gal. (82 L)
Transmission
8Fx8R Mechanical Shuttle
Brakes
Wet disc
Hydraulics
Open center
Drive Type
2WD / 4WD

Related Products